The answer to, "will it fit"

[MartijnGizmo]

Partsman was only able to take of 4.7mm of his BMW-wheels: http://www.motoringunderground.com/f...ad.php?t=22889

[Go_Fast]

Thanks. I did not see that thread.

[rayzmini]

Im lookin to do 20"s on my 2012 cm r60....they sugest a 225 35 20.....so what other options do u think I should run to help fill the wheel gap I want it to look like the red one not the blue in these pics I posted...

[rickyr53]

You need to lower it.

[Rally]

Yup, looks like you need to lower it 2-3 inches.

[Fraserlo]

Hi all! I'm not sure if this has been asked and answered but I have an R56 Mini Cooper S and I'm planning to throw on some Rotiform BLQ's 17x8 et20 with stock suspension setup. How is it going to fit? Is it an easy install and drive type of thing since I'm not dropped?

[Go_Fast]

Originally Posted by Fraserlo

Hi all! I'm not sure if this has been asked and answered but I have an R56 Mini Cooper S and I'm planning to throw on some Rotiform BLQ's 17x8 et20 with stock suspension setup. How is it going to fit? Is it an easy install and drive type of thing since I'm not dropped?

Rotiform BLQ's 17x8 et30 on stock suspension: http://www.motoringunderground.com/f...63&postcount=5

You will poke 10 more millimeters than I am.

[shaggy11]

Hi, I am finally in the market for new wheels. I am currently running stock 17x7et48 on 205/45. I have 20mm spacers up front and 25mm in the rear. I still need around an inch wider front and rear to fit my ZeeMax body kit. I was about to pull the trigger on team dynamics pro race 1.2 17x8et20 but figured I would post here and see what you guys think.

Thanks,
Hayden

[Chase]

Originally Posted by shaggy11

Hi, I am finally in the market for new wheels. I am currently running stock 17x7et48 on 205/45. I have 20mm spacers up front and 25mm in the rear. I still need around an inch wider front and rear to fit my ZeeMax body kit. I was about to pull the trigger on team dynamics pro race 1.2 17x8et20 but figured I would post here and see what you guys think.

Thanks,
Hayden

Why dont you test fit one of Drews wheels. He has 8 with an ET20

but im telling you, you can fit 8 et0

[Mindphunk]

I'm looking at rotiform nue 17x8 with a 30 offset. Any issues clearing my jcw brakes?

[glnr13]

r53 or r56? JCW brakes came in different sizes for the 2 different eras

[Mindphunk]

R59

[techman94]

Ok guys im new to the mini cooper scene I just bought an 08 non s with 6 speed trans and im about to purchase some wheels...questioncis will a 16x9 with a +15 offset fit stock height?

[Flamez]

Originally Posted by techman94

Ok guys im new to the mini cooper scene I just bought an 08 non s with 6 speed trans and im about to purchase some wheels...questioncis will a 16x9 with a +15 offset fit stock height?

It will fit, but at that offset you'll likely rub if you drop it to a height that will look reasonable. At stock height it's gonna look ridiculous.

[RLB]

Hey guys, I'm considering some new wheels I have the tires for them already so those are set. the wheels will be 16x7.5 et20. the tires that would go on them are 215/45 falken azenis.

i currently have a set of BBS RS on the car. they are 15x8 et-4(yes negative) with some 205/55 yoko s drives. it looks like this:


I'm just looking for some confirmation that the new wheels will fit a little better as i do want to lower the car a bit more when the new wheels go on. Thanks!