View Single Post
  #1  
Old 09-05-2020, 01:10 PM
Thumper460's Avatar
Thumper460 Thumper460 is offline
Y Rated - 186 mph
 
Join Date: Dec 2006
Location: Orange Park Fl. 32065
Posts: 117
Default 81 mm Big Bore W11 engine. (R52-R53)

As we continue having fun with the W11 R53 MCS, We have been approached numerous times on ENGINE BUILDS. So we decided to make a 'big bore' engine. (1.8 Ltr engine)
81 mm bore ( vs the 77 mm stock) forged Pistons, Polished Steel Crankshaft, K1 H-beam rods, Engine block is bored and sleeved with a STEEL Sleeve. Engine is then 'blueprinted' ( clearance/end gaps/Decked ) and assembled. This is the SHORT BLOCK only.

Parts used:

JE Custom Forged Pistons
JE Ring-set and Locks
K1 H-Beam connecting rods
Crankshaft mic'd and polished
Aluminum-silicon Performance Rod and Main Bearings
STEEL Sleeve Then Bored and Clearances set

Give us a PM or check my FB page.
__________________
WWW.Thumperheads.com

THUMPER HEAD Nitrous Fed Methanol Injected Screaming Supercharger all BRG 06 MCS!! The fun begins at 4K in 6th
Reply With Quote